MDF, medium density fiberboard, is the best choice for a paint-grade panel. This 48 pound density panel is cost-effective, very well suited for painting and can be customized for any type of environment. Paint grade panels support a wide variety of light and medium duty loads, and is available in a T-Lip construction. Panels meet phase 2 of California Air Resources Board (CARB) emission requirements.

LPL is the industry standard and the most popular display panel on the market today. Using MDF as a substrate, LPL is available in finishes of white, black, light and dark gray, almond, hard rock maple, cherry and brushed aluminum. Los Angeles also stocks anigre and oak. LPL has proven finish durability, and is attractive in appearance and price. These panels are also designed for light and medium loads. We are continuously reviewing new colors to offer in these less expensive panels. Larger quantities may also make available colors not shown here.

Colors are approximate. Actual color samples available upon request.

There is a very large selection of HPL colors and patterns available among a number of laminate manufacturers. Whether seeking out a brand new color, or using a timeless classic, our MDF panels are available with factory installed laminates. Minimum order is one panel, and the color choices are endless.

Many colors and patterns are available. Please click on the manufacture's link to review the color/pattern that best meets your need.

This product is a .080” thick acrylic mirror sheet and comes with a protective plastic or paper masking to aid in installation. Mirror will enhance your product and create a focal point with its attractive reflective surface.

Stocked in rotary red oak veneer, as well as rotary white birch and white maple. Our two west coast factories can also manufacture additional custom grain patterns, as specified.

Cubed panels, with grooves in either direction, are a popular alternative to typical slatwall paneling. You will receive the merchandising advantages of slatwall with a different look. The vertical lines break up the horizontal lines to give a unique appearance. Choose your pattern, from 6” up to 24” squares; or try a different pattern with 6” x 12” rectangles. Available in paint grade, LPL, HPL, mirror and veneer.

Omniwall—we invented this T-metal channel insert. Omniwall is our trade name for a T-insert in the groove and is the industry standard for panel strength. Panels are constructed with aluminum inserts in each groove, giving superior strength, appearance, and tighter tolerances. Omniwall, metal channel inserts are offered in mill finish, black and brass; and can be matched with our complete range of slatwall panels including LPL, HPL, mirror, veneer and MDF paint grade. Metal omniwall inserts are recommended for applications requiring additional weight bearing capacity. Metal channels cannot be added to boards that were not originally manufactured for metal inserts. Omniwall metal inserts must be specified during the initial order.

Whether you choose a matching or contrasting color, factory installed plastic channel inserts are a great choice for finishing the groove for a clean and upscale appearance, as well as adding durability to the groove edge. This insert is aesthetic and adds no strength to the groove. Plastic channel is available for our T-lip Spacewall panels and is stocked in white, black, gray and almond.

ColorGroove: This is the do-it-yourself option for changing out the color of the groove. Available in 130 foot rolls, ColorGroove allows for an extended run across multiple panels. Installed in minutes with scissors and needle-nose pliers, ColorGroove is available in white, black, gray, almond, red, blue, gold/silver mirror.

We stock L and U shaped 8’ trim strips in mill finish aluminum and plastic. Plastic L channel can be used for outside edges or inside corners and is stocked in white, black, gray and almond; plastic U end caps are stocked in white, black and gray. Aluminum end cap is stocked in L and U shapes.